XERO Pure Water Window Cleaning System
The XERO Pure is a 3-stage water purification system, purifying water when cleaning glass or solar panels guarantees spot-free results. The pure water system utilizes tap water that has been stripped of naturally occurring minerals. The minerals in the water are measured using total dissolved solids (TDS). The water dries spot-free leaving surfaces professionally clean without the use of chemical additives.
For the XERO Pure, the three-stage stages of purification include Carbon, RO (reverse osmosis), and DI (deionization). In the first stage, water enters the carbon filter, where large fragments are removed. The water then enters the RO membrane, which does the bulk work to remove contaminants. It has VFT, Variable Flow Technology, giving you the best performance at differing PSI levels. The last stage of filtration is when water enters the DI housing for that final brush-up to ensure its TDS is below 10 ppm. Once your TDS starts to read above 10 ppm, it is time to switch out your resin.
This process uses 100% purified water manufactured onsite to agitate the dirt, residue, and buildup from the glass and frames and rinse it away to the ground using very low pressure. The water is pumped on site from the spigot to a water fed pole reaching up to four stories from the ground. The windows are washed and rinsed with a soft bristle brush, and then left to air-dry minutes later with a perfect spot-free shine.
We Clean Everything!
Another benefit of our pure water window cleaning services over traditional window cleaning is that traditional window cleaners will only clean the glass; the frames and sills are generally extra. With our pure water window cleaning system we clean your frames and sills as a standard part of our service! Why is this so important? Because if your frames and sills are not cleaned, when it rains the dirt from the frames will flow onto your clean windows, meaning windows which might have been cleaned yesterday will be dirty again tomorrow.
Why Use Pure Water?
Mineral free water provides incredible cleaning action and spot free windows without using any chemicals that can hurt your landscaping, damage your paint and home, and pollute waterways. It keeps windows cleaner for a longer period of time, leaving no residue or build up on the surface.
As this technology is NOT using chemicals or soaps in our treatment of the water, you will find your windows will stay much cleaner for longer because the surface of the window has no residue, which may attract dirt particles. Let There Be Light Window Cleaning cleans the entire window casement, sill and glass surface to remove dirt particles. This is followed by a spot free ultra-pure water rinse. By cleaning window casements, sills, frames, and glass surfaces with this method you can expect a better cleaning result for a much longer of time.